Thermo plate
heat exchangers
At the heart of our heat exchanger technology is the thermo plate also called LP pillow plate or embossed plate due to the shape of plates after expansion.
What is a Thermo plate?
A LP pillow plate is a fully welded heat exchange plate. The plate consists of two plates that are spot-welded together. The plates are sealed with a welded seam along the contours of the plates. The plate is finally expanded until the desired expansion height is achieved. The expansion height is the maximum space between the two plates.
A fully welded heat exchange plate
Material selection is of course essential when selecting the right design for a heat exchange duty. But another and sometimes more important factor is the welding of the thermo plates. A thermo plate can have several hundred spot welds – each a potential risk for corrosion or fouling if not handle with care. ATHCO-Engineering use resistance welding to produce the spot pattern and the seam welding for the thermo plates.
What are Thermo plates used for?
In short heat exchangers, due to the flexible nature of the Thermo plates, they are applied in several different heat exchanger applications:
Condensation
– Steam
– Partial
– VOC
– Vacuum
Feed/Effulent
Gas/Liquid
Gas/gas
Liquid/Liquid
Fouling applications
Pyrolysis, Syngas
Chilled water
Ice production
Cooling / Heating jackets
No add material to weld
Limited pollution of the metal sheets.
The corrosion and strength of the materials are maintained.
No visible welding seems
Hence no nucleated spots for fouling, corrosion and freezing.
No crevice – highly susceptible for corrosion.
Only a low heat input at the welding spot
The strength and corrosion resistance of the heat-affected zone is nearly that of the parent material.
No space behind the welding
No risk of corrosion in between the weld metal sheets.
Product advantages
- Very easy to clean (high sanitary standard).
- Efficient heat transfer because of large surface area to volume ratio.
- Compact design and simple installation.
- Good thermal operation efficiency due to high heat transfer coefficients.
- Each heat exchanger is individually designed for the heat load, flow rate and pressure drop limitations of the specific application.
- Self-cleaning effect due to the smooth surface of the thermo plates.
- Fouling tendency is reduced to an absolute minimum, and that also applies to the need for maintenance.
- Energy-saving and greener solutions.
Field of application
Other industries
About ATHCO
ATHCO is a Danish company founded in 1947
Today we are a leading specialist in advanced heat transfer technology and recovery. Our core business is to design and manufacture tailor-made equipment for the process industry. Our mission is to optimise our customers’ process, and we provide innovative cost-reducing solutions customized for every single project.
